A bottom lash map is a placement plan, not a fixed chart. It records the intended visual direction across the lower lash line so the artist can make consistent decisions about length, curl, spacing and attachment placement. The final choice should follow the client's natural lashes, eye shape, comfort and the instructions for the products being used.
1. Define the visual objective
Start by describing the result in plain language: subtle definition, balanced lower framing or a more visible lower-lash effect. This keeps the map tied to the design goal instead of copying a diagram that may not suit the client.
2. Assess the lower lash line
Observe the natural lash direction, density, usable attachment area and any uneven zones. Do not treat every visible lash as suitable for the same extension choice. If the lower lash line cannot support the planned result comfortably, simplify the design.
3. Plan the length progression
Use relative progression rather than assuming one universal set of lengths. Mark where the design should begin, where it should become most visible and where it should soften. The transition should look intentional from normal viewing distance.
| Decision | What to record on the map | What to verify before application |
|---|---|---|
| Length | Relative progression across the lower lash line | Natural-lash suitability and a balanced transition |
| Curl | Direction of the intended lower framing | Product instructions, viewing angle and comfort |
| Spacing | Where definition should be concentrated or softened | Whether the rhythm looks even without overcrowding |
| Placement | Start, transition and finishing zones | Attachment access, direction and separation |
4. Choose curl and direction
Curl changes how the lower design is seen from the front and side. Compare the planned direction with the client's natural lash direction and the intended finish. Avoid forcing every zone into an identical angle when the natural lashes do not support it.
5. Set spacing and placement
Mark a repeatable rhythm, then leave room to adjust during the service. Spacing should support clarity and separation rather than simply maximizing the number of extensions. Recheck the map after the pads and tape are positioned because the working view can change.
6. Check symmetry and comfort
Compare both eyes from the same viewing position. Symmetry means the visual result feels balanced; it does not require identical attachment on naturally different lash lines. Stop and reassess if the client reports discomfort, and follow the product manufacturer's use instructions.
7. Choose the appropriate bottom-lash material
The map defines the design; the live product page remains the source for current specifications and availability. Artists can compare the Bottom Lashes collection, including the 0.07mm Individual Bottom Lash and 0.10mm Individual Bottom Lash, after the mapping decision has been made.
Frequently asked questions
Should the same bottom lash map be used for every client?
No. Use the map as a client-specific planning record and adjust it to the natural lashes, eye shape, desired result and comfort.
Do bottom lash maps need exact numbers in every zone?
Not always. A relative progression can be more useful when the natural lash line varies. Record enough detail for the artist to repeat the intended direction consistently.
How should an artist choose between different diameters?
Make that decision from the natural-lash assessment and the current product instructions. This guide does not replace product-specific suitability checks.
What should be checked before application begins?
Confirm the visual objective, usable attachment area, length progression, curl direction, spacing, symmetry plan and client comfort.
Can a bottom lash map be changed during the service?
Yes. The map is a working plan. Update it when the real attachment area, direction or balance differs from the initial assessment.