Cils en Bouquets DIY et Kits

What Are Lash Clusters?

Lash clusters are small, pre-fanned segments of individual lash fibers bonded onto a soft, flat base. Instead of one strip glued along the entire lash line, each cluster is applied to a small section of your natural lashes — which is why they are also called segment lashes or DIY lash extensions. Because every cluster is placed individually, the finished look follows the natural curve of your eye rather than sitting on top of it as a rigid line.

This puts clusters in the middle of the lash spectrum: faster and far cheaper than a salon set of eyelash extensions, but more customizable and longer-wearing than a strip lash. A full set takes about 10–15 minutes once you have practiced the mapping routine below.

Lash Clusters vs. Strip Lashes vs. Salon Extensions

Understanding D Numbers (Cluster Density)

The number before the "D" describes how many lash fibers make up a single cluster. It is the fastest way to judge how much volume a tray will give you, and it is the main thing to get right when you are choosing your first set.

• 10D–20D — light, wispy and very natural. Best for daytime looks, short lashes, or building a graduated set where the inner corner stays soft.
• 30D–40D — the everyday middle ground. Enough density to read as a full lash line without looking heavy. This is where most first-time cluster users should start.
• 50D — noticeably fuller, closer to a volume set of extensions. Good for evening wear and for anyone with naturally sparse lashes.
• 80D–100D — maximum density for dramatic, mega-volume looks. These hold their shape under stage lighting and photograph with a solid black lash line.

Mixing densities across the eye is the single biggest upgrade you can make. Most sets look best when the outer third is one step heavier than the inner third.

How to Apply Cluster Lashes at Home

1. Prep. Start with clean, dry lashes. Oil, makeup and moisturizer all shorten wear time — cleanse the lash line and let it dry completely.
2. Curl (optional). Curling your natural lashes first helps the clusters sit up instead of pointing straight out.
3. Map. Lay the clusters out in the order you intend to apply them, working from the inner corner outward. Shorter clusters go at the inner corner, longer ones at the outer corner to open the eye.
4. Bond. Apply a thin line of lash bond to the base of the cluster, then place it under your natural lashes, close to the lash line — never directly on the eyelid.
5. Seal. Once the set is complete, seal the bases with a sealant to lock the bond. This is what gets you to 3–5 days of wear.

Work in front of a mirror with your elbow supported, and apply the outer corner last — it is the easiest section to over-build.

How Long Do Lash Clusters Last?

A properly applied cluster set lasts 3–5 days. The two variables that decide where you land in that range are the bond and how you handle water: avoid steam, swimming and oil-based cleansers for the first 24 hours, and clean around the eyes with an oil-free remover when you take the set off. Removing the clusters gently — never pulling them off dry — protects your natural lashes so you can reapply immediately.

Which Cluster Set Should You Start With?

If you are new to clusters, start with a mixed-density tray so you can experiment without committing to one look: our 30D & 40D DIY Cluster Lashes cover the natural-to-full range in a single box. If you want maximum drama, go straight to 80D & 100D. For color, our 40D Colored cluster lashes come in six shades so you can tint the outer corner or build a full colored set. And if you would rather have everything in one box, the 320pcs DIY Cluster Lash Kit includes bonder and sealant, remover and tweezers. All of our clusters are made from soft Korean PBT fiber and are 100% vegan.

DIY Lash Extension Kits: Everything in One Box

If you would rather not assemble your own setup, a DIY lash extension kit bundles the three things every set needs: cluster lashes, bond and sealant, and remover and applicator tweezers. A kit is the cheapest way to find out whether cluster lashes fit your routine, because it removes the guesswork about which adhesives and tools actually work together.

• 320pcs DIY Cluster Lash Kit - 30D and 40D clusters plus bonder and sealant, remover and tweezers; roughly 25-35 full sets in one box.
• 240pcs mixed-density trays - choose 10D/20D, 30D/40D, 30D/50D or 80D/100D depending on how natural or dramatic you want the set, then add a lash adhesive separately.

Starting with a kit also teaches the correct routine in the right order: bond, place, seal, then remove gently with the included remover instead of pulling the clusters dry. Once you know which density and style you reach for most, switching to single trays is easy.

Mapping Your Clusters Before You Apply

Clusters follow a map just like salon sets do - the difference is that you plan in segments instead of single lashes. Decide where your longest segments sit before the bond comes out: longest at the outer third for a cat-eye effect, longest at the centre for an open, doll-like eye, or an even gradient for a natural finish. Our guide to lash mapping for clusters walks through the maps zone by zone, including how to adjust them for hooded, round and downturned eyes.

Frequently Asked Questions

Are lash clusters the same as individual lashes?
No. Individual lashes are single fibers applied one by one, usually by a technician. Clusters are pre-fanned segments of several fibers on a shared base, designed to be applied at home in a fraction of the time.

Can I sleep in cluster lashes?
Yes. Sleep on your back or on a silk pillowcase where possible; side sleepers usually see the outer corner on the contact side loosen first.

Can I wear clusters with mascara?
Waterproof mascara will break down the bond. Sealant and a lash-safe coating are the better route if you want more depth.

How many clusters do I need for one set?
Most people use 4–6 clusters per eye depending on how much of the lash line they cover, so a 240-piece tray is roughly 20–30 full sets.

What do the D numbers mean - 10D, 30D, 50D?
The D number counts the fibers in each single cluster. 10D and 20D are the lightest, closest to a natural lash line. 30D and 40D are the everyday middle - visible fullness without a heavy base. 50D and above (60D, 80D, 100D) pack more fibers per cluster for a denser, darker finish; the step from 50D to 60D is gradual, so choose by how bold you want the result rather than by the number alone.

Are these clusters reusable?
With gentle removal and a clean, oil-free wipe-down, clusters can often be worn a second time. Once the base loses its shape, replace them.

What is the best eyelash extension kit for beginners?
A kit with mixed 30D and 40D clusters is the best starting point: the densities cover natural-to-full looks and the included bond, sealant, remover and tweezers mean the first set needs no extra purchases.

What glue do you use for lash clusters?
What is sold as lash cluster glue is actually a two-part bond-and-seal system, not salon lash glue. You paint a thin layer of cluster bond at the base of your natural lashes, place the clusters underneath, then finish with sealant on top to lock them and remove tackiness. The 320-piece DIY cluster kit includes the bond, sealant and remover you need. Never use professional 1-3 second adhesive for clusters: it is made for a technician isolating one natural lash at a time, gives off strong fumes at close range, and is far too strong for a shared cluster base.

Is a DIY lash kit suitable for sensitive eyes?
Yes, provided you choose a latex-free, sensitive-friendly adhesive - all of our bonder formulas are latex-free, and our lash glue collection lists the sensitive options.